1. SKF bearing grease lubrication:
SKF bearings http://www.alierbearings.com/brand/skf/index2083.html are relubricated, preferably during a planned outage, and regularly replenished, while removing the old grease, or through the drain hole, to squeeze out the old grease.
Wipe clean before adding fresh grease.
If the bearing box does not have a grease nipple, the bearing box cover or the end cover should be opened to remove the old grease. After cleaning, the same type of fresh oil will be added.
2. SKF bearing lubricating oil:
Check the oil level and oil quality of lubricating oil regularly. Normally, normal oil level should be in the range of 1/3-2/3 of the equipment oil level window or indication.
Oil compensating way for oil cup, the display of the oil level, only on behalf of the filling capacity, and the bearing box oil level, is to meet operation requirements, the CPC a lower than a quarter of its total volume, oil cup, fill oil may be considered.
Check and fill the oil method, take out a small amount of lubricating oil as the sample, compare with fresh lubricating oil, have the ability of the unit, may consider to carry on the oil testing, to ensure the oil quality is qualified.
SKF bearing if the sample appears to be cloudy, then, it may be the result of mixing with water, which is commonly said oil emulsification, at this time, oil should be replaced.